To Next PageTo Next PageWhat to do if Pro-Form Treadmill power turns off during use?
If the power turns off during use, check the power switch and ensure the power cord is properly plugged in. If issues persist, unplug the treadmill, wait five minutes, and then plug it back in. Also, try removing and reinserting the key from the console.
How to fix Pro-Form POWER 995i walking belt slipping?
If the walking belt slips when walked on, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn.
How to fix Pro-Form POWER 995i Treadmill power does not turn on?
If the power does not turn on, ensure the power cord is plugged into a properly earthed outlet and the key is inserted into the console. If the switch protrudes, wait five minutes before pressing it back in.
What to do if Pro-Form POWER 995i Treadmill walking belt is off-center?
If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
How to fix Pro-Form POWER 995i incline that does not change correctly?
If the incline of the treadmill does not change correctly, hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Alternatively, press the Stop button and then press the Incline increase or decrease button.
What to do if Pro-Form POWER 995i Treadmill console displays don't function?
If the displays of the console do not function properly, remove the key from the console and unplug the treadmill.
Why does Pro-Form Treadmill walking belt slow when walked on?
If the walking belt slows down when walked on, locate the Reed Switch and the Magnet on the left side of the Pulley and turn the Pulley until the Magnet is aligned with the Reed Switch. Also, if the walking belt is overtightened, remove the key and unplug the power cord, then use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
How to fix Pro-Form Treadmill tablet holder that won't stay in place?
To fix the tablet holder, rotate it backwards. Then, tighten the indicated screw slightly until the tablet holder stays in place when rotated to the desired position.
General| Weight Capacity | 300 lbs |
|---|---|
| User Weight Capacity | 300 lbs |
| Folding | Yes |
| Heart Rate Monitoring | Yes |
| iFit Compatibility | Yes |
Instructions for safely connecting the treadmill's power cord to an earthed outlet.
Steps to safely start the treadmill, including key insertion and initial checks.
Guide to using the treadmill in manual mode, including setting weight and speed.
Steps to safely fold the treadmill for storage, including safety precautions.
Instructions for safely moving the folded treadmill, emphasizing proper lifting and handling.
Steps to safely unfold and prepare the treadmill for use.
Routine cleaning and inspection procedures for optimal treadmill performance.
Steps to resolve issues related to the treadmill not turning on or turning off during use.
How to fix issues with the console display not functioning correctly, including reed switch adjustment.
Procedure to recalibrate the treadmill's incline system.
Troubleshooting steps for when the walking belt slows down during use.
How to correct walking belt slippage by adjusting idler roller screws.
