To Next PageTo Next PageWhat to do if Pro-Form Fitness Equipment pedals slip while pedaling?
If the pedals slip while you are pedaling, the drive belt may need adjustment. Try tightening the Locknut until the Drive Belt is tight.
How to fix Pro-Form PRO 9.9 Fitness Equipment console that does not display correct feedback?
If the console does not display correct feedback, you should adjust the reed switch. Inspect and properly tighten all parts each time the elliptical is used. Also, plug in the power cord and turn the left Crank Arm for a moment. If needed, repeat this procedure until the console displays correct feedback.
Proper grounding and connection of the power cord to prevent electrical shock.
Guidance on mounting, pedaling, and dismounting the elliptical safely.
Steps for powering up the elliptical console and preparing it for use.
Guide to operating the elliptical in manual resistance and incline settings.
Explains various data readouts like calories, distance, speed, and time displayed.
Procedures for safely powering down and unplugging the elliptical.
Guide to selecting and performing pre-programmed workouts.
Regular cleaning and inspection for optimal performance and wear reduction.
Guide to adjusting the reed switch for correct console feedback.
Proper grounding and connection of the power cord to prevent electrical shock.
Guidance on mounting, pedaling, and dismounting the elliptical safely.
Steps for powering up the elliptical console and preparing it for use.
Guide to operating the elliptical in manual resistance and incline settings.
Explains various data readouts like calories, distance, speed, and time displayed.
Procedures for safely powering down and unplugging the elliptical.
Guide to selecting and performing pre-programmed workouts.
Regular cleaning and inspection for optimal performance and wear reduction.
Guide to adjusting the reed switch for correct console feedback.
General| Brand | Pro-Form |
|---|---|
| Model | PRO 9.9 |
| Category | Fitness Equipment |
| Language | English |
