14
13
85
F
86
14
79
86
87
14
14
14
12
64
27
36
1
1
12. Identify the Right and Left Trays (27, 36).
Attach the Trays (27, 36) to the Console Base
(64) with eight #8 x 1/2" Screws (1); do not
overtighten the Screws.
13. Identify the Right Handrail Cover (85). Set the
Right Handrail Cover on the right Handrail (86).
Start two #8 x 3/4" Truss Head Screws (14) into
the bottom of the Right Handrail Cover; do not
fully tighten the Truss Head Screws.
Next, slide the Right Handrail Cover (85) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (14); do not overtighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(88) with two 8 x 3/4" Truss Head Screws (14).
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (87) in the same
way.
88
To Next Page
Loading...
