3 1/2 2A Mini Digital Clamp Meter user manual
13
2) Set the rotary selector to ℃℉/ range position.
3) Connect the red test leads to the anode and the black test
lead to the cathode of the temperature load for testing.
4) Take the reading on the LCD.
REPLACING THE BATTERIES
WARNING
To avoid electric shock, make sure that the test leads
have been clearly move away from the circuit under
measurement before opening the battery cover of the
meter.
1) If the sign appears, it means that the batteries should be
replaced.
2) Loosen the fixing screw of the battery cover and remove it.
3) Replace the exhausted batteries with new one.
4) Put the battery cover back and fix it again to its origin from.
NOTE：
Do not reverse the poles of the batteries.
To Next Page
Loading...
