Programming The Thermostat
Set Time
Set Program Schedule 5+1+1 or 7 Day
Programming The Thermostat
Continued on next page...
1. Press TIME
2. Day of the week will be ashing. Use the or key
to select the current day of the week.
3. Press PROGRAM
4. The current hour is ashing. Use the or key to
select the current hour. Make sure the correct a.m. or p.m.
choice is selected.
5. Press PROGRAM
6. Minutes are now ashing. Use the or key to
select current minutes.
8. Press the TIME button in order to go back a step.
7. Press HOLD/RUN when completed.
1. Select HEAT or COOL with the system switch. Note: You have
to program heat and cool each seperately.
2. Press PROGRAM
3. Monday-Friday is displayed and WAKE is shown. You are now
programming the wake time period for the weekday setting.
4. Time is ashing. Use the or key to make your time
selection for the weekday WAKE time period.
5. Press PROGRAM
6. The setpoint temperature is ashing. Use the or key
to make your setpoint selection for the weekday wake period.
7. Press PROGRAM
8. Repeat steps 4 thru 7 for weekday LEAVE time period, for
weekday RETURN time period, and for weekday SLEEP time
period.
To customize your program schedule, follow these steps
Weekday:
To Next Page
Loading...
