EasyManua.ls Logo

ProAudio PP107233 - Change the Display Information; Troubleshooting

ProAudio PP107233
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
17
Symptom Remedy
General
Sound cannot be heard. Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected. Check the [SOURCESELECT] setting. (Page 6)
Sound cannot be heard.
The unit does not turn on.
Information shown on the
display is incorrect.
Clean the connectors.
The unit does not work at all. Reset the unit. (Page 4)
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Radio
Radio reception is poor.
Static noise while listening
to the radio.
Connect the antenna firmly.
CD/USB/iPod
Disc cannot be ejected.
Press and hold
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit (page 4).
Noise is generated. Skip to another track or change the disc.
“PLEASE EJECT” appears. Reset the unit (page 4). If this does not solve the
problem, consult your nearest service center.
Troubleshooting References
Change the display information
Each time you press DISP, the display information changes.
If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information
(eg. station name) appears or display will be blank.
Main display
Source name Display information: Main display
STANDBY Source name
Clock back to the beginning
TUNER Frequency
Clock back to the beginning
CD or USB For CD-DA:
Disc title/Artist
Track title/Artist Playing time Clock back to the
beginning
For MP3/WMA/WAV/FLAC files:
Song title/Artist
Album title/Artist Folder name File name Playing
time
Clock back to the beginning
iPod When [MODE OFF]/[BROWSE MODE] is selected. (Page
9
)
Song title/Artist
Album title/Artist Playing time Clock back to the
beginning
AUX Source name
Clock back to the beginning

Related product manuals