© 2012 by Proceq SA 31
357 30 309
Equotip test block extra calibration G
(extra calibration with a G impact device on an Equotip test block,
incl. calibration certificate)
357 90 909
Equotip test block extra calibration, certified by accredited institute
according to DIN 50156-3 (Leeb)
357 90 919
Equotip test block extra calibration, certified by accredited institute
according to ISO 6506-3 (Brinell)
357 90 929
Equotip test block extra calibration, certified by accredited institute
according to ISO 6507-3 (Vickers)
357 90 939
Equotip test block extra calibration, certified by accredited institute
according to ISO 6508-3 (Rockwell)
Part No. Accessories
353 00 001
Indicating device Equotip 3
353 00 010
Equotip 3 stand assembly
353 00 085
Equotip 3 AC adapter
353 00 029
Rechargeable Equotip 3 battery
353 99 011
Equotip 3 carry case with cut-out for test block (except G) and
accessories
353 00 070
Protective carry pocket for the Equotip 3 indicating device
(use together with 380 00 079)
380 00 079
Carrying strap adjustable, with padding
(use together with 380 00 070)
353 00 037
Equotip 3 neck / wrist strap
353 00 080
Equotip 3 impact device cable 1.5 m (4-pole)
353 00 086
Equotip 3 impact device extension cable 5 m (4-pole)
353 00 083
Equotip 2 / 3 impact device cable 1.5 m (3-pole / 20-pole)
353 00 084
Equotip 3 / 2 impact device cable 1.5 m (4-pole / 3-pole)
353 00 089
Equotip 3 / 1 impact device cable 1.5 m (4-pole / 2-pole)
350 01 039
Equotip SVP 40 connector cable 2-/20-pole between Equotip 3
indicating device and SVP power supply
353 00 082
Equotip 3 RS 232 adapter cable 1.5 m for connection to printer
351 90 018
USB cable 1.8 m
350 01 015
Equotip coupling paste (can)
350 71 316
Plexiglass sleeve for Equotip impact device DL
350 01 007
Loading stick for Equotip impact device DC
350 01 008
Equotip cleaning brush D/DC/C/E/D+15/S/SVP40
350 08 006
Equotip cleaning brush G
To Next Page
Loading...
Need help?
General
