3. Annunciation Setting
l To go to next menu after generator parameter, press “Increment”.
l The LCD shall display “annunciation setting”.
l Annunciation settings can modified / viewed by pressing “Enter”.
(for setting details pls refer table 5.1)
4 RS-485 Parameter In ECON F (4C) only
l To go to next menu after Annunciation Setting, press “Increment”.
l The LCD shall display “ ”.RS-485 parameter
l can modified / viewed by pressing “Enter”.RS-485 parameter
(for setting details pls refer table 5.1)
5. Display History
l To go to next menu after annunciation press “Increment”.
l The LCD shall display “Display History”.
l Trip record / history can be viewed by pressing “Enter”.
l ECON keep a record of last 32 tripping with date and time stamp.
l Tripping records are updated on first in first out basis
6. Display Event
l To go to next menu after history press “Increment”.
l The LCD shall display “Display Event”.
l Display Event can be viewed by pressing “Enter”.
l ECON keep a record of last 32 event with date and time stamp.
l Event record is updated on first in first out basis.
7. Display Start Stop
l To go to next menu after event press “Increment”.
l The LCD shall display “Display Start / Stop”.
l Start Stop can viewed by pressing “Enter”.
l ECON keep a record of last 100 start and stop event with date and time
stamp.
l Start/ stop record is updated on first in first out basis.
8. Reset Service Alarm
l To go to next menu after Start-Stop press “Increment”.
l The LCD shall display “Reset Service Alarm”.
l Service due hour can be reset by pressing start button after entering in
to this menu.
9. Adjust Clock
l To go to next menu after Service Alarm press “Increment”.
l The LCD shall display “Adjust Clock”.
l Time can be modified / viewed by pressing “Enter”.
Page - 5
Operating Instructions
To Next Page
Loading...
Need help?
General
