Procom HearthSense BF30T-BB User Manual

VENT
-
FREE GAS WALL
HEATER
OWNER’S OPERATION AND
INSTALLATION MANUAL
BLUE FLAME MODELS
BF30T
-
BB
WARNING: If the information in this manual is not
followed exactly, a re or explosion may result causing
property damage, personal injury or loss of life.
— Do not store or use gasoline or other ammable va-
pors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the re
department.
— Installation and service must be performed by a quali-
ed installer, service agency or the gas supplier.
WARNING: This appliance is equipped for natural and
propane gas. Field conversion is not permitted other than
between natural or propane gases.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at
1-866-573-0674, 8:00 am - 4:30 pm CST, Monday through Friday

Procom HearthSense BF30T-BB Specifications

General

Type	Blue Flame
Model	BF30T-BB
Category	Gas Heater
Heating Capacity	30, 000 BTU
BTU Output	30, 000 BTU
Ignition Type	Piezo
Vent Type	Vent-Free
Heating Area	1, 000 sq. ft.
Oxygen Depletion Sensor (ODS)	Yes
Safety Shutoff	Yes
Thermostat	Yes
Brand	Procom
Fuel Type	Natural Gas or Liquid Propane
Ventilation	Vent-Free
Safety Features	ODS, Safety Shutoff

Summary

Safety Information

General Safety Warnings

Critical warnings and precautions for safe operation and installation of the heater.

Specific Hazard Warnings

Warnings covering gas leaks, fire, explosion, and carbon monoxide risks.

Qualified Installing Agency

Definition and Responsibilities

Defines what constitutes a qualified agency and its responsibilities for installation and service.

Product Specifications

Product Features

Safety Pilot System

Air for Combustion and Ventilation

Combustion Air Needs

Explains the need for fresh air for proper combustion in energy-efficient homes.

Air for Combustion and Ventilation (Continued)

Ventilation Air Requirements

Discusses ventilation air needs from inside or outside the building.

Ventilation Air Sources

Details methods for providing ventilation air from inside and outside the building.

Installation

Check Gas Type

Clearances to Combustibles

Fastening Heater to Wall

Attaching to Wall Anchor Method

Attaching to Wall Stud Method

Gas Selection and Identification

Information on setting up the heater for propane or natural gas.

Natural Gas Installation Procedure

Detailed instructions for setting up the heater for natural gas use.

Connecting to Gas Supply

Essential steps and warnings for connecting the heater to the gas supply line.

Checking Gas Connections

Procedures for leak testing and verifying all gas connections after installation.

Pressure Testing Heater Gas Connections

Steps for pressure testing the heater's gas connections.

Operation

Pre-Lighting Safety Checks

Critical safety precautions to follow before attempting to light the appliance.

Lighting Instructions

Step-by-step guide for safely lighting the pilot and main burner.

Turning Off the Heater

Electrical Connection

Grounding Instructions

Electrical Wiring Safety

Warnings and requirements for electrical wiring and servicing.

Inspecting Burners

Pilot Flame Pattern

Burner Flame Pattern

Care and Maintenance

Burner Cleaning

Troubleshooting

Gas Leak Detection

What to do immediately if a gas leak is detected.

Pressure Switch Issues

Ignitor and Spark Problems

Troubleshooting issues with the ignitor button, spark, and connections.

Burner Ignition and Flame Issues

Diagnosing delayed ignition, backfiring, and yellow flame problems.

Smoke, Odor, and Gas Leaks

Odor, Noise, and Residue Issues

Heater Shutoff and Condensation

Replacement Parts

Service Hints

Low Gas Pressure Issues

Warranty