Prodigit 3302F Mainframe - Auto Sequence Commands; Auto Sequence Command List (Table 4-8)

3302F Mainframe Operation Manual 37
AUTO SEQUENCE: Available for all modules.
AUTO SEQUENCE COMMAND NOTE RETURN
FILE {SP} {n}{； NL}
n=1~9 1~9
STEP {SP} {n} {；NL}
n=1~16 1~16
TOTSTEP {SP} {n}{；NL}
Total step n=1~16 1~16
m=1~10 n=1~15
SB {SP} {m,n} {；NL}
m:STATE , n:BANK
T1 {SP} {NR2} {；NL}
0.1~9.9(s) 0.1~9.9(sec)
T2 {SP} {NR2} {；NL}
0.1~9.9(s) 0.1~9.9(sec)
SAVE {；NL}
Save “File n” data
REPEAT {SP} {n} {；NL}
n=0~9999 0~9999
AUTO REPLY
“PASS” or “FAIL:XX”
RUN {SP} {F} {n} {；NL}
n=1~9
(XX=NG STEP)
TABLE 4-8 AUTO SEQUENCE COMMAND LIST