DSO26 User Manual
10
REAR PANEL CONNECTIONS
Power Switch: turns the units mains supply off and on.
Mains Fuse: located in a finger-proof holder adjacent to
the mains inlet. A spare fuse is also located in this holder.
Mains Inlet: connected via a standard IEC socket.
External: RS232 standard via a 9 pin D-type connector, for
connection to a PC, enabling the uploading of new software to
the unit.
Audio In-Out: 3 pin XLR sockets are provided for each
channel. All are fully balanced, pin 2 hot, 3 cold, 1 screen.
Always replace the fuse with the correct type and rating as shown on the
rear panel legend.
To Next Page
Loading...
