PROEL PRL250 - Suggested Configurations; Configurazioni Consigliate; Spanish; Configuraciones Aconsejadas

PRL250 PRL600 PRL950 PRL1400
NEXT series 2 x NEXT12P8 2 x NEXT12HP8 4 x NEXT12HP8
2 x NEXT12HP4
TFLV/TFL series 2 x TFL10P 4 x TFL10P 4 x TFL12P8
2 x TFL12P4 2 x TFL12P8 2 x TFL15P8
2 x TFL15P4 2 x TFL212P4
2 x TFL115SP4 2 x TFL115SP8
1 x TFL215SP8 (Bridge) 1 x TFL218SP8 (Bridge)
TPRMARKII series 2 x TPRK8P 4 x TPRK8P 4 x TPRK10P 4 x TPRK15P8
2 x TPRK10P 2 x TPRK12P8 2 x TPRK153P8
2 x TPRK12P4 4 x TPRK12P8 4 x TPRK153P8
2 x TPRK15P4 2 x TPRK15P8 4 x TPRK15MP
1 x TPRK118SP8 (Bridge) 2 x TPRK153P8 2 x TPRK118SP4
2 x TPRK15MP
SMART
PLUS
series 2 x SMT10P 4 x SMT10P 2 x SMT15P8 2 x SMT153P8
2 x SMT12P 2 x SMT12P 4 x SMT15P8 4 x SMT153P8
2 x SMT12MP 4 x SMT12P 2 x SMT153P8 4 x SMT15SP8
2 x SMT15P4 2 x SMT215P4 2 x SMT18SP8
2 x SMT12MP 2 x SMT15MP
2 x SMT12SP8 4 x SMT15MP
2 x SMT15SP4 2 x SMT15SP8
2 x SMT18SP4
SPARK series 4 x SPARK65PG
4 x SPARK65PW
EDGE series 2 x EDGE8CXP 4 x EDGE8CXP
17
CONFIGURAZIONI CONSIGLIATE
SUGGESTED CONFIGURATIONS
CONFIGURACIONES ACONSEJADAS
PRL SERIES
CONFIGURAZIONI Italiano
CONSIGLIATE
SUGGESTED English
CONFIGURATIONS
CONFIGURACIONES Español
ACONSEJADAS
• SISTEMI A TENSIONE COSTANTE
Utilizzando gli amplificatori PRL insieme ai
trasformatori di linea a tensione costante
(70V/100V) TRL è possibile connettere più
diffusori con trasformatore di linea a tensio-
ne costante.
La somma delle potenze dei diffusori con-
nessi non deve superare la potenza di uscita
dell’amplificatore e del trasformatore:
•
TRL150.4 + 2xPRL600 max 150W (4CH)
•
TRL300.2 + 1xPRL950 max 300W (2CH)
•
TRL600.2 + 1xPRL1400 max 600W (2CH)
• CONSTANT VOLTAGE SYSTEMS
Using the PRL amplifiers with the TRL con-
stant voltage transformers (70V/100V), it is
possible to connect several speakers with
constant voltage transformer.
The total power of connected loudspeakers
must not exeed the amplifier’s and transfor-
mer’s output power:
•
TRL150.4 + 2xPRL600 max 150W (4CH)
•
TRL300.2 + 1xPRL950 max 300W (2CH)
•
TRL600.2 + 1xPRL1400 max 600W (2CH)
• SISTEMAS DE VOLTAJE CONSTANTE
Utilizando las etapas de potencia PRL con
los transformadores de línea de voltaje con-
stante (70V/100V) TRL es posible conectar
varios difusores con transformador de línea
de voltaje constante.
La suma de las potencias de los difusores
conectados no debe exceder la potencia de sali-
da de la etapa de potencia y del transformador:
•
TRL150.4 + 2xPRL600 max 150W (4CH)
•
TRL300.2 + 1xPRL950 max 300W (2CH)
•
TRL600.2 + 1xPRL1400 max 600W (2CH)