19
THE INFORMATION MODE
T
he console features an information mode that keeps
track of the total distance that the walking belt has
m
oved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select a measurement system of miles or kilome-
ters, and turn on and off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The display will show the total number of hours the
treadmill has been used.
The display will also show the total number of kilome-
ters (or miles) that the walking belt has moved.
The word “Metric” for kilometers or “English” for miles
will appear in the display. Press the Speed increase
button to change the unit of measurement if desired.
N
ote: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
store. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
s
witch the circuit breaker to the reset position, and in-
sert the key into the console. However, when you re-
move the key, the displays will remain lit, although the
buttons will not function. If the demo mode is turned on,
the word “On” will appear in the display while the infor-
mation mode is selected. To turn on or off the demo
mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console
To Next Page
Loading...
Need help?
General