24
THE INFORMATION MODE/DEMO MODE
T
he console features an information mode that keeps
track of the total number of hours that the treadmill has
b
een operated and the total number of miles (or kilo-
meters) that the walking belt has moved. The informa-
tion mode also allows you to select miles or kilometers
as the unit of measurement and to turn on and turn off
the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. Then,
release the Stop button. When the information mode is
selected, the following information will be shown in the
display:
An “E” (for English) or an “M”
(for metric) will appear in the
lower right corner of the dis-
play. Press the Speed in-
crease button to change the
unit of measurement, if de-
sired.
Important: If a “d” appears in the display, the
console is in the “demo” mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
c
an be plugged in, the key can be removed from the
console, and the display will remain lit; the buttons will
n
ot operate.
I
f a “d” appears when the information
mode is selected, press the Speed decrease button
so the “d” disappears.
The upper left corner of the
display will show the total
number of hours that the
treadmill has been used.
The lower left corner of the
display will show the total
number of miles (or kilome-
ters) that the walking belt has
moved.
To exit the information mode, remove the key from the
console.
To Next Page
Loading...
Need help?
General