To Next PageTo Next Page
Why does my ProForm Treadmill power turn off during use?
If your ProForm Treadmill's power turns off during use, first check the power switch. Also, ensure that the power cord is properly plugged in. If the issue persists, remove the key from the console and then reinsert it.
How to fix ProForm 710 Zlt Treadmill if the power does not turn on?
If the power of your ProForm Treadmill does not turn on, make sure that the power cord is plugged into a properly earthed outlet and that the key is inserted into the console. If the switch protrudes, wait for five minutes and then press the switch back in.
How to turn off demo mode on ProForm 710 Zlt?
If the console displays on your ProForm Treadmill remain lit after you remove the key, try holding down the Stop button for a few seconds to turn off the demo mode.
What to do if the console display does not function properly on ProForm 710 Zlt Treadmill?
If the displays of the console of your ProForm Treadmill do not function properly, remove the key from the console and unplug the power cord.
How to fix console display with lines on ProForm 710 Zlt Treadmill?
Adjust the contrast level of the display of your ProForm Treadmill.
What to do if the walking belt is off-center or slips on ProForm 710 Zlt?
If the walking belt on your ProForm Treadmill has shifted to the left, turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt slips when walked on, remove the key and unplug the power cord.
General
