b. Error code "ERROR 3_ may appear on the TV if the speed ofthe walking belt
surges above the selected speed setting. Remove the key from the console, wait
for ten seconds, and then reinsert the key. If the error code appears again,
please call our toll-free HELPUNE. Do not operate the treadmill untilthe problem
is corrected.
ERROR 3:
OVERSPEED
CHECK USER MANUAL
c. Error code =ERROR 4= may appear on the TV if the speed ofthe walking belt re-
mains below 1.0 mph when a higher speed setting is selected. Remove the key
from the console, wait for ten seconds, and then reinsedthe key. If you weigh
over 200 pounds, R may be helpful to increase the inclineof the treadmill. If the
error code appears again, please call our toll-free HELPLINE. Do not operate the
treadmill until the problem is corrected.
ERROR 4:
LOW SPEED HIGH PWM
CHECK USER MANUAL
d. Error code "ERROR 6" may appear on.the TV when the console isfirst turned
on. Remove the key from the console, unplug the power cord, and wait for thirty
seconds. Plug in the power cord and reinsed the key. If the error code appears
again, please call our.toll-free HELPLINE. Do not operate the treadmill until the
problem is corrected.
ERROR6:
CHECKSUM
CHECK USER MANUAL
e. Error code "ERROR 7" may appear on the TV when the console is firstturned
on. Remove the key from the console, unplug the power cord, and wait for thirty
seconds. Plug in the power cord and reinsert the key. Ifthe errorcode appears
again, please call our toll-free HELPLINE. Do not operate the treadmill until the
problem is corrected.
ERROR7:
RAMTEST
CHECKUSERMANUAL
27
To Next Page
Loading...
