EasyManua.ls Logo

ProForm C950 PFTL69720 - Assembly Completion and Final Checks; Installing the Book Rack; Ensuring Proper Tightness and Floor Protection

ProForm C950 PFTL69720
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen
wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 24). To protect the
floor or carpet from damage, place a mat under the treadmill.
7
4. Clean the back of the Book Rack (68) with a clean cloth
and rubbing alcohol.
Orient the Book Rack (68) so that the decal is faceup as
shown. Remove the paper from the top of the Book Rack
Tape (54). Make sure that the straight edge of the Book
Rack is pressed against the plastic around the Console
(82). Press on the top of the Book Rack and the bottom of
the Console Base (81). Wait for 24 hours before setting a
book on the Book Rack.
54
54
81
68
82
Decal
Edge
4

Related product manuals