PART LIST Model No. 831.24843.4 Rll12A
Key No. Qty. Description Key No. Qty. Description
1 9 #8 x 1/2" Ground Screw 43 1 Left Rear Foot
2 6 3/8" x 3 1/4" Screw 44 1 Left Upper Body Arm
3 10 3/8" Star Washer 45 2 Console Clamp
4 19 #8 x 3/4" Screw 46 1 Right Rear Foot
5 8 5/16" x 3/4" Screw 47 1 Console Ground Wire
6 8 5/16" Star Washer 48 1 Motor Hood
7 4 #8 x 1" Screw 49 1 Incline Motor
8 2 #10 x 1 1/2" Screw 50 2 Lift Frame Bushing
9 2 3/8" x 2 1/2" Bolt 51 1 Lift Frame
10 12 #8 x 1/2" Screw 52 1 Belly Pan
11 2 M6 x 50mm Screw 53 1 Power Cord Grommet
12 2 3/8" x 1" Bolt 54 1 Power Cord
13 3 Hood Clip 55 1 Power Switch
14 18 #8 x 3/4" Truss Head Screw 56 4 1/4" x 3 1/2" Screw
15 1 3/8" x 1 3/4" Bolt 57 1 Console
16 6 3/8" Jam Nut 58 1 Console Base
17 2 1/4" x 3/8" Screw 59 1 Left Handrail
18 4 #8 x 1/2" Screw 60 2 Lower Handrail Cap
19 4 5/16" x 1 1/2" Bolt 61 1 Console Crossbar
20 4 5/16" Nut 62 1 Key/Clip
21 2 Upper Handrail Cap 63 1 Upright Wire
22 2 #8 Star Washer 64 1 Right Handrail
23 4 1/4" Star Washer 65 2 Upper Body Arm Insert
24 2 Drive Roller Washer 66 1 Left Upright
25 2 1/4" x 1 1/4" Screw 67 1 Latch Housing
26 2 Incline Frame Washer 68 1 Latch Pin Assembly
27 1 Left Foot Rail 69 2 Warning Decal
28 2 Platform Cushion 70 4 Base Cap
29 1 Caution Decal 71 2 Thick Base Pad
30 2 Belt Guide 72 2 Thin Base Pad
31 1 Drive Roller/Pulley 73 1 Upright Grommet
32 8 #10 Flat Washer 74 1 Base
33 2 #10 x 3/4" Screw 75 2 Wheel
34 1 Right Upper Body Arm 76 1 Right Upright
35 1 Drive Motor 77 2 Lift Frame Pin
36 1 Controller 78 8 #8 x 3/4" Tek Screw
37 1 Controller Plate 79 2 1/4" Star Washer
38 1 Frame 80 1 3/8" x 1 1/2" Bolt
39 1 Walking Platform 81 2 Wire Tie
40 1 Walking Belt 82 1 Latch Spacer
41 1 Right Foot Rail * - User's Manual
42 1 Idler Roller
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. If a part is missing, call 1=888=533=1333. *These parts are not illustrated.
24
To Next Page
Loading...
