14. Only Required with other brands of sim cards
15. If used in 4G this is required to let the charger know which sim server to connect to.
16. This is the login password for the or laptop on commissioning default is 12345678 and is
recommended to change this on commissioning.
17. RCD Calibration
18. Solar Modes
19. Enable Load Management / Solar Features
20. Property Main Fuse Size (kw)
21. Load Management Meter Model
22. Opt Out/ Opt In of the UK EVC regulations default charging hours plug + charge
23-27. UK EVC regulations 2021 charge allowed times
28. UK EVC regulations 2021 randomised delay to 600 seconds and can be changed by end
user
29. Save settings
30. Language
31. Charger Module
32. LAN Connection default gateway
33. Charger DNS server
34. Static output of the charger
35. Charging Mode: 1. APP/RFID mode; 2. RFID Mode; 3. Plug & Charge Mode
36. RFID Default Pin
37. WIFI Password
38. Default charging cost for records for multi tariffs set up in the app.
39. Daylight saving start + end date
40. Plug + charge allowed charge window
41. Heartbeat signal sent to the server (time in seconds)
42. Password required by some sim cards that are not Project EV.
43. Time out (in seconds) for starting charge without plugging in a vehicle
44. Required for testing purposes only
45. Minimum export power required before the vehicle charge will engage (1.76kw/6amp)
46. Load Management reading hardware - CT/Power Meter
47. Opt Out / Opt In of the UK EVC regulations default charging hours plug and charge
48. Power Meter Address
49-53. Limit your charger to the adjacent times. 0 is default setting 34.
Project EV Standard App
Creating a new account
Firstly, if you have not done so already, you will need to create a unique account for yourself.
Select register on the top right of the app and follow the required fields. These are de-noted
with a * next to them. If an installer details are unknown, please state unknown as they are a
required field. Once all the fields have been completed, read and tick the user agreement
before pressing register.
Installer details are used by Project EV to give assistance to installers, and to contact them
should an issue be raised. This could be installation based and not charger hardware issues.
Installer Top Tip:
If you are installing Project EV chargers regularly, set your own account up to commission the
chargers - when completed simply delete the charger from your app and add to the
customer account - All the settings entered are transferred over!
25
To Next Page
Loading...
