Need help?Do you have a question about the Projecta IC1500L and is the answer not in the manual?
General| Output Voltage | 12V DC |
|---|---|
| Output Current | 15A |
| Input Voltage | 220-240V AC, 50Hz |
| Battery Type | Lead Acid (Wet, MF, Ca, AGM, Gel) |
| Charge Stages | 8 Stage |
| Protection Features | Reverse polarity, over voltage, short circuit, over temperature |
Crucial safety instructions including ventilation, avoiding moisture, and protecting against damage.
Explains the 5-stage charging process: Soft Start 1, Soft Start 2, Bulk, Absorption, and Float.
Details Polarity Protection and Over Temperature Protection for safe operation.
Connects the charger leads to the battery terminals when the vehicle is not in use.
Connects charger leads to vehicle battery and chassis for negatively earthed systems.
Connects charger leads to vehicle battery and chassis for positively earthed systems.
Connects the charger to a 240V mains socket and turns on the power.
Guides on setting the appropriate charge rate based on battery size.
Instructs to press the CHARGE button to initiate the charging process.
Details the procedure for safely disconnecting the charger from mains and battery.
Lists error codes, their meanings, and recommended remedies for common faults.
To Next Page
