ECL
4
- 2 channels: dimmer, strobe
- 5 channels: dimmer, strobo, auto programs, auto speed, dimmer speed
• 4-char LED display for control
• Auto mode: built-in programs with execution speed adjustment
• Master/Slave mode for stand-alone operations of more units
• Dimmer curve setting: 4 selectable congurations
• Flicker-free frequency (>400 Hz) diodes suitable for camera recording
• Quiet operations, forced-air cooling with no-noise fans
Structure and Power supply
• High-resistance aluminum body designed to facilitate heat dissipation
• Designed for compatibility with industry-standard accessories as blades, gobo/eects holders, tube-
lens of other ERS projectors
• Internal Protection: IP20
• Input/Output Power connections: Neutrik NAC3MPA/NAC3MPB
• Input/Output Signal connections: 5p XLR
• Suspension bracket, rear handles and clamp levers designed for fast and easy mounting and pointing
• Power supply: 100-240V 50/60Hz
• Operating conditions: -20/45 °C
• Power output for daisy-chain connection of more units: up to 8 projectors at 230V
• Max output consumption: 172W
• Weight: 9,25 kg
• Dimensions (WxHxD): 282x466x530 mm
Technical drawing
Fig.1
466
282 656
To Next Page
