ProLights H150UFC - Master;Slave Mode; Color Mode; Fixed Color Mode; Dinamic Color Mode

H150UFC
14
2.13 MASTER/SLAVE MODE
This mode allows you to connect multiple drives online without a controller. The rst unit will be set as the
Master and the others function as Slave with the same eect.
• Press the MENU button until the display shows the voice Stand Alone.
• Press the UP/DOWN button to select the Set Master to set the unit as a Master or the Set Slave to set the
unit as a Slave.
Press the STOP button to exit the setup menu.
2.14 COLOR MODE
To set the color mode in the manual operation mode, refer to the following procedure.
• Press the MENU button until the display shows the Color Mode item.
• Press the UP/DOWN button to select the ON or OFF.
Press the STOP button to exit the setup menu.
2.15 FIXED COLOR MODE
To set the show mode with static colors in the manual operation mode, refer to the following procedure.
• Press the MENU button until the display shows the item Color Mode (Macro).
• Press the UP/DOWN button to select the desired mode Macro: 01 - Macro: 10 (hold to quick scroll).
Press the STOP button to exit the setup menu.
2.16 DINAMIC COLOR MODE
To set the show mode with dynamic colors in the manual operation mode, refer to the following proce-
dure.
• Press the MENU button until the display shows the item Color Mode (Chase).
• Press the UP/DOWN button to select the desired mode Chase: 01 - Chase 15 (hold to quick scroll).
Press the STOP button to exit the setup menu.
2.17 INTERVAL TIME
To set the interval time between one emission of smoke and the other, refer to the following procedure.
• Press the MENU button until the display shows the voice Timer (Interval).
• Press the UP/DOWN button to select the desired interval Interval 15 Sec - Interval 360 Sec (hold to quick
scroll).
Press the STOP button to exit the setup menu.
2.18 DURATION TIME
To set the duration of a single smoke, refer to the following procedure.
• Press the MENU button until the display shows the voice Timer (Duration).
• Press the UP/DOWN button to select the desired duration Duration 0 Sec - Duration 5 Sec.
Press the STOP button to exit the setup menu.
2.19 WIRELESS SETTING
To set the wireless operating mode, refer to the following procedure.
• Press the MENU button until the display shows the voice Wireless Setting.
• Press the UP/DOWN button to select the ON or OFF.