PROLiNK MASTER II Series User Guide

34
4) Enter the command "^S006SOP31" to set the UPS to model 31, the UPS will return "^D006ACK" when
receiving. If you want to set the UPS model to 33, the command is "^S006SOP33".
Note: setting this parameter is not directly performed. Settings will only be saved when the UPS is
turned off normally with the battery connected.
5) After the UPS turns off normally, the output terminal needs to be shortened.

PROLiNK MASTER II Series Specifications

General

Brand	PROLiNK
Model	MASTER II Series
Category	UPS
Language	English