Need help?Do you have a question about the PROLiNK PRO1201SFC and is the answer not in the manual?
General| Type | Line Interactive |
|---|---|
| Capacity | 1200VA / 720W |
| Input Voltage | 230VAC |
| Output Voltage | 230VAC |
| Output Waveform | Simulated Sine Wave |
| Battery Type | 12V/9Ah x 2 |
| Typical Recharge Time | 4-6 hours recover to 90% capacity |
| Battery Recharge Time | 4-6 hours recover to 90% capacity |
| Audible Alarm | Battery Mode, Low Battery, Overload, Fault |
| Communication Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Input Frequency | 50/60Hz |
| Indicators | AC Mode, Battery Mode, Fault |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0% to 90% relative humidity (non-condensing) |
| Output Frequency | 50Hz or 60Hz ±1Hz |
| Transfer Time | 2 - 6ms (Typical) |
Introduces the Quick Start Guide and directs users to the website for further information and specifications.
Essential safety guidelines for preventing fire, electric shock, and overheating during UPS operation and maintenance.
Lists the UPS unit and the Quick Start Guide provided in the package.
Identifies front and rear panel components, indicators, and connectivity ports of the UPS.
Connects the UPS to AC power for initial charging and operation.
Guidelines for optimal UPS placement to ensure proper airflow and avoid environmental hazards.
Connects devices and communication lines to the UPS for protection and monitoring.
Instructions for powering the UPS unit on and off using the power switch.
Guide to download and install the ViewPower software for UPS monitoring and management.
Table listing common UPS issues like no display, alarms, and short backup time with their respective causes and solutions.
Detailed technical data including capacity, input/output voltage, battery, protection, and interface.
Provides contact details for PROLINK offices in Indonesia, Malaysia, and Singapore for customer support.
To Next Page
