EN 8
3.1. Information
The first page of the web configuration of the IP Camera is the information page. You can see the model
name/firmware version, IP Camera ID, registration status, network type and current video settings (bandwidth,
resolution) in this page.
The IP Camera can be viewed remotely by the LiveView Software only when the IP Camera is registered. If this
IP Camera is not registered, please check the Ethernet wiring of your network environment. The “Network
type” field displays the network connection (wired or wireless) and method (DHCP, PPPoE or static IP) the IP
Camera is running. The “Video users” field displays the number of connected video viewing users.
Figure 3-3: IP Camera Information page
To Next Page
Loading...
