EN 32
3.20. Set To Factory Default
For some reason, for example you forgot the web login password, you may want to set the IP Camera to the
factory default settings. The only thing you need to do is using a stick to press the “reset” button on the back
of the IP Camera body for more than 4 seconds and release it, do this when the IP Camera is powered on. The
IP Camera will reset to the factory default settings and restart automatically.
The web login account will be “admin” (no password), the play-video password will be back to the original
password after reset to factory default.
Figure 3-27: Stick on the reset button to set to the factory default
To Next Page
Loading...
