ProMed EMT-4 - Pause Mode; Setting the Time

D
US
F
I
E
Pause mode
1. To temporarily pause treatment, press the “Program” button.
In the display, the pause symbol will start to flash. To conti-
nue, press the “Program” button once more.
2. To stop treatment ahead of time, press the “ON/OFF” but-
ton 2 times. The unit will revert to standby mode and display
the time.
3. Once the treatment period is completed (countdown), the
unit will automatically switch to standby mode.
Setting the time
1. In standby mode, the unit display the time. If it is showing the
treatment settings, press the “ON/OFF” button.
2. To set the clock, now press the “Set” button. The hours will
start to flash. Use the “+” or “–“ buttons to set the desired
hour. Press the “Set” button once more. The minutes will start
to flash. Use the “+” or “–“ buttons to set the minutes. Press
the “Program” button to confirm.
63