ProMinent concept plus - Technical Data; Performance Table (230 V); Electrical Data

22
ProMinent
®
* Suction lift with filled suction line and liquid end
** Priming lifts with clean and wetted valves, metering fluid, water
(20 °C), at 100 % stroke length, 180 strokes/min, atmospheric
pressure outlet and/or open venting valve and correctly installed lines.
Materials
Liquid end material specification: see type code
Housing: PPE, glass fibre reinforced
Electrical data
Mains frequency: 50 Hz / 60 Hz
* Fuses must have approvals according to VDE, UL and CSA.
Decommissioning and disposal / Technical data
10 Decommissioning and disposal
IMPORTANT
• When decommissioning a pump, clean all traces of chemicals
and dirt from the housing and particularly the liquid end.
• Observe all relevant disposal directives for your area
(particularly with regard to electronic waste)
11 Technical data
Performance table 230 V version
115 V/AC version CNPa
Wattage: 11 W
Current I eff: 0.26 A
Peak current 1.2 A
Switch-on peak current < 3 A for < 0.1 ms
Fuse*: 0.315 AT
230 V/AC version CNPa
Wattage: 10 W
Current I eff: 0.12 A
Peak current 0.5 A
Switch-on peak current < 4 A for < 0.1 ms
Fuse*: 0.16 AT
10
16
10
7
0.6
1.0
2.0
3.9
0.07
0.10
0.18
0.39
5
8
5
3.5
0.8
1.4
2.6
4.5
0,08
0.13
0.24
0.42
180
180
180
180
6x4
6x4
6x4
6x4
6
6
5
4
1.8
2.0
2.5
3.0
8
8
5.5
3
1000
1601
1002
0704
Pump
type
Minimum delivery rate
at maximum
back pressure
Minimum feed rate
at medium
back pressure
Max.
stroke
rate
Connection
size
ext. Ø x int. Ø
Priming
lift
*
Priming
lift
**
Admissible
priming pressure
Intake
bar l/h
ml/
stroke
bar l/h
strokes/
min mm m Wc m Wc bar
ml/
stroke
3
1.5
8.0
13.5
0.74
1.42
1.5
1.0
10.8
15.5
1.00
1.4
180
180
8x5
8x5
2
1.5
2.0
1.5
1
0.5
0308
0213