Promise Technology Ultra100 TX2

To Next Page

To Previous Page

Ultra100™ TX2 User Manual

load c:\SERVER.312\nbi31x

15. Save the file.

16. DOWN and EXIT the server.

17. Remove the NetWare CD-ROM.

18. Reboot the server.

For Existing NetWare 3.12 Servers:

8. Edit STARTUP.NCF and add the following lines after any set parameters but

before any file loading:

load c:\SERVER.312\312ptd\native\start\npapatch

load c:\SERVER.312\mmattrfx

load c:\SERVER.312\nbi31x

Also add a subsequent line to "load ULTRA" to load the

ULTRA.HAM driver.

9. Boot the server.

Promise Technology Ultra100 TX2 - Page 22