PROPAIN HUGENE - INFLATING THE TIRE

1 2 3
// INFLATING THE TIRE
1. AĊŦĴÐĴìÐĴðīÐĴďÅďķĴǡÅīȘ
2. ìÐÆāĴìÐÆďīīÐÆĴťĴďåĴìÐĴðīÐȘ
ĺ The tire must contact the rim evenly around its
ÐĊĴðīÐÆðīÆķĉåÐīÐĊÆÐȘAåĊďĴșīÐăÐĮÐĴìÐðīșĨīÐĮĮ
the tire into the center of the rim bed and repeat
the procedure.
ĺ Have the tire seat checked by a professional if in
any doubt.
3. Slowly rotate and shake the wheel to distribute the
ĮÐăðĊæŦķðÌďŒÐīĴìÐÐĊĴðīÐðĊĊÐīĮķīåÆÐďåĴìÐĴðīÐȘ
4. åĴÐīĴìÐĴðīÐÅÐÌðĮåķăăřĮÐĴÐÌșīÐÌķÆÐĴìÐĨīÐĮĮķīÐĴď
your own requirements.
5. Screw on the valve cap.
6. Carry out a short test ride and check the tire pressure
regularly.
AåřďķìŒÐďīÌÐīÐÌřďķīÅðāÐœðĴìĴķÅÐăÐĮĮĮÐĴķĨșřďķĉķĮĴťăăÅďĴìĴðīÐĮœðĴìĴìÐÐĊÆăďĮÐÌĮÐăðĊæŦķðÌÅÐåďīÐĴìÐťīĮĴīðÌÐȘ
1. Release the air from the tire completely.
2. Unscrew the valve cap.
3. Unscrew the valve insert from the valve using the valve
key supplied.
1. wìāÐĴìÐĨīďŒðÌÐÌĮÐăðĊæŦķðÌåďīÅďķĴďĊÐĉðĊķĴÐȘ
2. 9ðăăĴìÐĮÐăðĊæŦķðÌĴìīďķæìĴìÐŒăŒÐðĊĴďĴìÐĴðīÐȘ
ĨĨīďŘðĉĴÐăřǥǟĉăďåĮÐăðĊæŦķðÌĮìďķăÌÅÐķĮÐÌ
per tire.
3. Screw the valve insert into the valve using the valve key
and tighten it by hand.
AåřďķìŒÐďīÌÐīÐÌřďķīÅðāÐœðĴìďķĴĴķÅÐăÐĮĮĮÐĴķĨșðĊŦĴÐĴìÐĴðīÐĮĴďĨīÐĮĮķīÐďåÅďķĴǡÅīȘ