Setup menu operation – Audio menu options
20
AUDIO MENU OPTIONS
Press MENU on the side panel or on the remote control and then use
/ to select the AUDIO menu, press ENTER
button to enter it (see the picture below).
1. Use
/ to select what you want to adjust in the AUDIO menu.
2. Press ENTER or
button to adjust (according to the guiding sign in the bottom right corner of the menu).
3. When you are satisfied with your adjustment. Press MENU to exit.
Balance
Press
/ button to select it and then use / to adjust the audio output between left and right speakers.
Bass
Press / button to select it and then use / to increase or decrease the level of the lower-pitched sounds.
Treble
Press / button to select it and then use / to increase or decrease the level of the higher-pitched sounds.
Sound Mode
You can use the presetting sound (User / Voice / Concert / Jazz)
You may select the sound mode directly by pressing the SOUND button on the remote control.
Surround Sound
Press
/ button to select it and then use to select the surround sound on or off.
Digital Audio Output (Coaxial Out )
Press
/ button to select it and then use to select the one of mode of the digital audio output such as PCM and RAW or
off.
To Next Page
Loading...
Need help?
General
