3. Power ON the unit as previously explained.
on the Remote Control repeatedly until the color of Indicator turns to
5. Power ON the connected external player and start playback as usual.
An external Video/Audio player (such as TV, DVD player, VCR, etc.) can be
connected to this unit and heard through the speakers.
2. Plug the other side of cable into Audio Out R & L jacks of the TV or external
device as the illustration below.
NOTE: Make sure to connect to AUDIO OUT. If you connect it into AUDIO IN of
external device, you will not hear the sound.
13
Rear view of the unit
1. Plug one side of RCA White and Red cable into the AUX 1 jacks on the rear
of the unit.
4. Press the Standby/Source button on the unit or press the SOURCE button
Violet.
AUX 1: TO TV/DVD/VCR/DVR LISTEN
AUX 2
AUX 1
L R
DC 12V,2.0A
ANT
Audio out jacks of
TV/DVD/VCR/DVR
OPTICAL
To Next Page
Loading...
Need help?
General
