8
Push the switch to the top position for alkaline batteries and pull down the switch to the bottom
for the rechargeable battery
6V Lead Acid External Battery
The ProStalk Digital Nature Camera is equipped with an external power jack designed to accept a
barrel plug cable to attach to a sealed lead acid battery (Sold separately). Battery cable and
complete 6V Lead Acid battery kits are available wherever the cameras are sold. Only ProStalk
external battery accessories are recommended.
• Make sure the camera power switch is OFF.
• Insert the battery pack plug into the DC 6V jack of the bottom of camera.
• Turn the camera power on.
• Please make sure the voltage and polarity (+/-) are correct before connection. Incorrect
voltage or polarity (+/-) will damage the camera. For our unit, it is “+” polarity inside and
“-“polarity outside.
Solar Charging Panel
The ProStalk Digital Nature Camera can also work with an external jack designed to accept a
barrel plug cable to attach to a solar charging panel (Sold separately). Solar Charging will only
work with 4*D Cell rechargeable NiMh “D” batteries. Normal Alkaline batteries do not work
with it.
To Next Page
Loading...