58
MARK76O0003 Rev 3
Replacing the Lamps
Once you have removed the acrlic you will want to unscrew and remove the metal lamp cov-
covers/ strips. Then with gloves on to protect the lamps from oils, twist the lamp and remove.
When replacing the lamp twist the lamp back into position. Listen for 2 clicks to ensure the
lamp is securely fastened.
Replacing Facial Tanners
Loosen the screw as indicated in the illustration below.Then open the blue filter window and
remove the lamp. Change out the lamp and make sure the switch is bent out so that it makes
contact with the blue filter glass when put back into position.
DO NOT TOUCH THE LAMP WITH YOUR HANDS (use soft cloth or gloves to replace facial
lamps)
To Next Page
Loading...
