ProSun AquaFrixio - Assembly Introduction and Room Environment; Product Specifications Overview; Room Environment Requirements; Power Supply Requirement

47
MARK68AF1001 Rev 2
Assembly Introduction
Required for assembly (not included):
• 1 wrenches to tighten nuts
• Power adapter kit (230V for commercial use, for warranty to apply voltage must be
between 218-230 V)
*Make sure you write the Serial Number (located on the back of the canopy) down on the
previous page and store the manual somewhere you can easily access. The Serial Number is
MANDATORY to order parts for your unit, as well as, any customer service calls.
Product Specications
• 86” long (218 cm)
• 40” wide (101 cm)
• 25” high (63 cm)
• 300 lbs empty (136 kg)
• 600lbslled(272kg)
• Weight Capacity of
375 lbs (170 kg)
ROOM ENVIRONMENT
• Indoors with a controlled climate
• Room should be between 74-78 degrees Fahrenheit
• Free of excessive dust and lint
• StableFlooring-WhenlledtheAquaFrixio weighs 600 lbs and meets most state residential and
commercial codes for weight. However, always use discretion when choosing a location for your
unit.
• IMPORTANT: Access to 220v (20 amp- dedicated line) grounded power supply.
4
0
.
00
i
n
20.50 in
78.50in
23.00 in
86.00 in
25.00