Need help?Do you have a question about the ProSun AquaFrixio and is the answer not in the manual?
Details on who needs to read and understand the manual for safe operation.
Specifies the device's intended medical purpose for relieving minor aches and pains.
Explains danger and safety symbols used throughout the manual for hazard awareness.
Provides instructions for safe transportation, including forklift use and environmental conditions.
Emphasizes the necessity of proper ventilation to prevent overheating and ensure safety.
Guidelines for setting up the equipment in a suitable room with proper airflow and electrical specifications.
Warns about electrical hazards during installation and stresses the need for authorized personnel.
Reinforces proper ventilation to prevent overheating and system damage during installation.
Describes the process of initial setup and handover by a certified technician.
General precautions for users, advising consultation with a doctor for specific health conditions.
Lists specific medical conditions where use is not recommended or requires doctor consultation.
Specifies the maximum ambient room air temperature for safe operation.
Emphasizes disconnecting power before servicing or repairing the unit.
Warns against operating the heater without sufficient water, which can cause damage and void warranty.
Lists detailed physical specifications including length, width, height, and weight.
Provides a recommended room dimension for optimal equipment output and airflow.
Lists power consumption, rating, fuses, continuous operation limits, and noise levels.
Details operating humidity, ambient temperature, and maximum altitude for the unit.
Outlines voltage requirements, warranty implications, and safety warnings regarding power supply.
Warns of fatal injury risk from touching live parts during maintenance.
Advises connecting only to a supply mains with protective earth to avoid shock.
Covers proper plug use, circuit loading, user-serviceable parts, and water contact hazards.
Lists general safety measures like supervision, intended use, cord handling, and avoiding obstructions.
Explains the importance of grounding for electrical safety and proper outlet connection.
Details critical instructions for the water heater, including filling and operation without water.
Outlines procedures for cleaning and disinfecting equipment components after each session.
Instructions on how to initiate a massage session, including timer overrides.
Explains how to adjust the massage duration from 1-60 minutes.
Details how to adjust the pressure intensity of the hydro jets.
Enables users to select zones, pressure, and duration for individual zones.
Instructions for individually testing components to ensure they are working correctly.
Details using 18 gauge stranded wire to connect the T-Max and AquaFrixio.
Describes the error when the water reservoir is not filled to the correct level.
Indicates a low water level and the need to refill the reservoir.
Essential precautions for safe operation and maintenance of the massage bed.
Critical warning about the risk of electric shock from high voltage components.
Outlines routine maintenance tasks that can be performed by unskilled persons.
Emphasizes using only distilled water to avoid voiding the warranty.
Recommends annual inspections by certified technicians for connections and components.
Addresses issues with jet noises or malfunction, suggesting checking for trapped air.
Troubleshooting steps for units with no power, involving circuit breakers and fuses.
Solutions for an unresponsive screen, including checking connections and restarting.
Covers non-critical and critical water level errors due to evaporation or leaks.
Diagnoses for units that are on but not functioning, checking power, timers, and voltage.
Solutions for overheating, including checking fans and room size.
Directs users to consult the manual or ProSun customer service for screen messages.
Critical warning to disconnect power before any repair or replacement work.
Stresses using only manufacturer-authorized replacement components to maintain warranty.
Prohibits unauthorized modifications and changes to the device.
Highlights the need for access to a 220v (20 amp) dedicated grounded power supply.
Steps for removing the fill cap and filling the unit with distilled water.
Specifies filling with 40 gallons of distilled water and notes warranty void if non-distilled water is used.
Performing an air check before attaching remaining skirts and filling with water.
Stopping massage and using manual mode to address air in the system.
Steps for priming the pump by selecting valves and hitting the pump button.
Details the warranty duration for different components and what is covered.
Outlines terms like proof of maintenance, original owner, and authorized service.
Lists exclusions from warranty, including misuse, cosmetic damage, and non-distilled water.
Details specific exclusions like electrical damage, external damage, and timing system failures.
Steps for customers to contact ProSun for warranty claims and parts.
Further limitations on repairs, consequential damages, and liability.
To Next Page
General