ProSun AquaFrixio - Product Preparation and Environment; Ventilation; Installation and Set-up

8
MARK68AF1001 Rev 2
Delivery:
Once equipment is delivered make sure proper temperatures, humidty and atmospheric
pressure are in place.
The following items are included in the delivery:
• Massage bed
• Pillow Top
• Computer Screen
• Water Conditioner
• Extra Under sheet
• Moving Tool
• All parts in assembly manual
• User Manual
• Filling Funnel
Note that equipment is delivered through third party freight company. Equipment will not
be brought inside the building by freight company unless prior arrangements are made.
Coordinate with ProSun installation department to set up delivery and installation details.
In a commercial setting an external timer is suggested. ProSun recommends to use this
accesory (T-Max Flushmount G2).
Ventillation:
The Device must always have proper ventilation. Failure to do so can cause in serious
safety hazards and overheating of the equipment.
DANGER!
Installation and Set-up:
Equipmentshouldonlybeinstalledindryrooms,onaatsurface,withproperventillationand
airing.Theroomshouldbetherecommendedsizeof8x7ftinordertoallowforgoodairow.
The unit should not be set up in a mobile environment or facility, i.e. trains, buses, ships. The
unit also should not be used outdoors, if used outdoors damage to the equipment is possible
and the manufacturer will not be held liable
Before starting the installation process or operating the equipment the transportation pallet
should be removed. Observe correct room sizes prior to installation the equipment and ensure
thatroomhascorrectelectricalspeccations.Thecustomermusthaveprovidedadedicated
powersourcewhencalledforinthetechnicalspeccaitionsoftheunit.
Environmental conditions for transport and storage:
• Relative humidty range of 10% to 95% including condensation.
• Atmospheric pressure range of 50kPa to 106 kPa.
• Storage temperature range: -40 °F (-40 °C) and 158 °F (70 °C)
• Let equipment sit for at least 2 hours if range was outside of ambient
temperature range.
Environmental conditions for operation:
• Relative humidty range of 30% to 75% including condensation.
• Atmospheric pressure range of 50kPa to 106 kPa.
• Optimum ambient temperature range: 70°F (21°C) and 90 °F (32°C)