52
MARK68AF1001 Rev 2
Tools/Items Necessary:
d
Water
40
Gallons
Distilled
Water
# 2 Phillips
3mm allen
wrench
1
2
Oncetheunitisinplace,removethell
cap then that is located at the head end
oftheunit.Thenusethefunneltollthe
unit with distilled water.
Afterlltubeisattached,llunitwith
40 gallons of distilled water.
Note: warranty is VOID if distilled
water is not used.
*Important*
Afterllingaircanbetrappedinthe
plumbing causing irregular jet opera-
tion. See troubleshooting guide (pg.
15) for instructions on removing the
Note: The unit will take 38-40 gallons. You will note that the
unitisfullwhenyouareabletoseethewaterinsidethell
tube and you can proceed to closing the cap.
Installation