11
93-305-05 Issue 0 © Copyright Protec Fire Detection PLC 2004
5.1 Testing the Indications (Lamp Test)
To test the functionality of the front panel indicators.
1. At access level 1 enter the 5 digit user code 1 3 4 4 2 or turn the keyswitch (depending
on the model purchased). The ‘Level 2 accessed’ indicator will light.
2. Press button ‘1’. The 3100 will light each row on the display in turn and sound the
internal buzzer.
3. Confirm that each indicator is operational, and that the buzzer can be heard clearly.
If a problem exists inform the site maintenance manager immediately.
6.0 System Fire Indications
The 3100 displays fire information on row 1 of the front panel display. The following sections
detail what each indicator means.
6.1 ‘General Fire’ Indicator Illuminated
The 3100 has detected a fire on one of its zones, or has been activated from another
piece of equipment connected to its ‘remote alarm’ input.
The building fire plan should be executed immediately.
6.2 ‘MCP Fire’ Indicator Illuminated
A manual call point has been activated on one of the detection zones.
6.3 Fire Zones 1 to 8 Flashing
The 3100 has detected a fire on the relevant zone. This will always be accompanied
by the ‘General Fire’ indicator.
6.4 Fire Zones 1 to 8 Illuminated Steady
The 3100 has detected a fire on the relevant zone. The fire has been accepted by a
user pressing the ‘Mute Buzzer’ button.
To Next Page
Loading...
