Need help?Do you have a question about the Protec 6100 and is the answer not in the manual?
General| Frequency | 50/60Hz |
|---|---|
| Batteries | 2 x 12V 7Ah |
| Networking | RS485, Ethernet |
| Communication Protocol | Modbus |
| Certifications | EN54 |
| Humidity Range | 10% to 95% non-condensing |
Details the responsibilities of the named person managing the fire alarm system.
Covers daily inspection and weekly functional tests for system integrity.
Details monthly, periodic, annual, and 5-yearly system testing requirements.
Allows viewing system status and basic operations.
Grants access to critical system functions and advanced controls.
Details the LCD display and general status indicators like Fire, Fault, and Test.
Explains zone status indicators and the use of code entry/navigation keys.
Describes the function of keys like Silence Alarms, Reset Panel, and Mute Buzzer.
Illuminates when a fire is detected on any zone or remotely.
Flashing red indicator for a specific zone experiencing a fire.
Details general fault indicator and specific zone fault indications.
Covers system, alarm device, and power supply fault indications.
Explains faults related to auxiliary supply, repeat panels, and fire links.
Details how zones, alarms, and fire links can be disabled and their effects.
Explains indications for power status, pre-alarm, and programmed output delays.
Describes how the panel responds to automatic and manual alarm activations.
Covers silencing alarms, resetting the panel, and manually activating alarms.
Shows the normal operating state of the panel.
Details how faults, disablements, and tests are displayed on the panel.
Shows the display when the panel is in a fire alarm condition.
Details how to enter and navigate the 6100's user menu system.
Covers viewing system faults, disablements, event logs, and alarm counters.
Includes procedures for clearing faults, testing indicators, and zone options.
Details disabling outputs, setting date/time, and exiting menus.
Explains how to enable the optional Fire Brigade Panel controller.
Details the operation of Silence Buzzer, Silence Alarms, Reset, and Disable buttons.
Covers entering access levels, muting buzzer, sounding alarms, and silencing.
Details panel reset procedures, testing indicators, and setting date/time.
To Next Page
