93-520-20 Issue 3.3 Page 42 of 60 CirrusPro Engineer’s Manual
3.4.16 Service Information
Acceptable Values:
Pump Pressure - > 5.7 psi
Supply voltage - 19V to 30V
LED current is - 0.26mA to 5.67mA
Airflow - Refer to Pipe Calculation
Average time between fills - Usually 4 to 6 days, depends on local conditions.
3.4.17 Reset Unit
By selecting this option the unit carries out a full reset. This is not usually necessary unless the option
is flashing, indicating that changes have been made that need a reset to be fully implemented.
This is instantly applied with no opportunity to cancel the action.
To Next Page
Loading...
