93-520-20 Issue 3.3 Page 7 of 60 CirrusPro Engineer’s Manual
1.1 Models and Equipment Covered
CirrusPro 100 Up to 100m of 25mm diameter sampling pipe. Single sampling pipe ‘inlet’ port.
CirrusPro 200 Up to 200m of 25mm diameter sampling pipe. Four, sampling pipe ‘inlet’ ports.
CirrusPro 200D As CirrusPro 200 with built in Display Panel (See CirrusPro RDP).
CirrusPro 200DSC As CirrusPro 200D but with four, scanned, sampling pipe ‘inlet’ ports.
CirrusPro 200+ (no display), 200D+ and 200DSC+ with larger ‘blower’ for longer pipe runs.
CirrusPro X4 As CirrusPro 200DSC with up to 40 sampling heads (not suitable for 25mm diameter
sampling pipe).
CirrusPro RDP Remote Display Panel. Multifunction Quarter VGA back lit LCD and controls.
To Next Page
Loading...
