To Next PageTo Next Page
Need help?Do you have a question about the Proteco Q26 and is the answer not in the manual?
General| Brand | Proteco |
|---|---|
| Model | Q26 |
| Category | Control Panel |
| Language | English |
Connections for power devices including motor and flashing light.
Connections for limit switches, photocells, start, stop, and pedestrian buttons.
Connections for the external aerial cable for radio reception.
Detailed wiring diagram for connecting the control panel to a 24Vdc motor.
Detailed wiring diagram for connecting the control panel to a 12Vdc motor.
Instructions for wiring the motor to the control panel outputs.
Guidance for connecting the flashing light and its operational modes.
Details on wiring safety photocells for closing and opening operations.
Instructions for connecting standard and parallel start push-buttons.
Instructions for connecting pedestrian start push-buttons.
Instructions for wiring emergency stop push-buttons.
Procedure for connecting the control panel to the 230Vac main power.
Information on powering the control panel using a solar panel.
Instructions for wiring back-up batteries for power failure operation.
Setting the control panel for step-by-step gate operation.
Setting the control panel for automatic closing operation.
Setting for automatic closing with multi-occupation function.
Procedure to clear all previously programmed radio transmitters.
Steps to program radio transmitters for gate operation.
Procedure to set or adjust the gate's working time.
Procedure to set or adjust the pause time between gate cycles.
Information on automatic deceleration time setting.
How the control panel automatically adjusts obstacle detection sensitivity.
