Q80A
08_2017
PROTECO S.r.l. Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
CONTROL PANEL FOR
DOUBLE/SINGLE SWING GATES
Multi-function control panel for double/single swing gate - 230Vac
• Programming display
• Electronic adjustment of each motor’s working time
• Automatic programming procedure with obstacle detection (anti-crushing function) or step-by-step programming
procedure with electronic adjustment of power and deceleration for each motor.
• “Quick closing” function
• Pedestrian Opening function
• Electronic adjustment of the delay between leafs for opening and closing.
• Multi-Occupation function.
• Pre-Blinking function.
• Additional radio channel (optional module)
• Terminal for electric lock (optional module)
• Reversing stroke and lock pulse functions for electric lock.
• Built-in radio receiver 433,92MHz (64 codes) suitable for standard fix-code transmitters or rolling-code transmitters.
• Terminal for safety edge 8K2 type
• Fault Diagnostic with display messages
230V ac
TECHNICAL FEATURES
Item code PQ80A, PQ80A1D
Control Panel Dimensions 137 x 84 x 37 mm
Box dimensions 220 x 290 x 90 mm
Control Panel Weight 160 g
Main Power 230 ~ 50-60Hz
Main Power Tolerance -10% +20%
Transformer 230/21Vac – 15VA
Main Fuse 5 A
Rated power input 600 W
Rated current 3.5 A
Current in stand-by mode 30 Ma
Blinker power supply 24 Vac, max 20 W
Accessories power supply 24 Vdc , max 5 W
Electric Lock power supplì 12 Vdc, max 15 W
Box dimensions 220 x295x95mm
Working temperature -20 +50 °C
Protection Level (with box) IP55
Instructions Manual
To Next Page
Need help?
General
