....
....
Q80A_8_2017 24
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
CLOSING DELAY between leafs
Use this setting to adjust delay time between leafs when closing (from 1 to 20 seconds).
1 Use buttons to move inside the menu, till the display shows:
2 Press button to confirm
3 Use buttons to set the delay time between closing leafs:
4 Press button to go back to the top level menus,
then press button again till the display shows:
or wait the timeout (20 seconds) to exit.
4.5 TIMES menu
Use this menu to adjust motors operating time and pause time before automatic closing.
Press button and use to select menu ,
then press button to enter the TIMES menu: display will show
Use buttons to scroll the lower level menus:
OPENING DELAY between leafs
Use this setting to adjust delay time between leafs when opening (from 1 to 10 seconds).
1 Use buttons to move inside the menu, till the display shows:
2 Press button to confirm.
3 Use buttons to set the delay time between opening leafs:
4 Press button to go back to the top level menus,
then press button again till the display shows:
or wait the timeout (20 seconds) to exit.
(OFF)
(max)
(OFF)
(max)
To Next Page
Loading...
Need help?
General
