Proteus PSS-515C - Cable A2 and Pulley Assembly

15
CABLE A2
CABLE A2
P5,P6
P7
19
14
14
L
2(3/8" x 32)
18
13
13
T
P5,P6
3(3/8" x 43)
18
13
13
U
P7
3(3/8" x 43)
14
23
CABLE A2
CABLE A2 AND PULLEY ASSEMBLY
1. SELECT CABLE A2. BOTH SIDE IS WITHOUT RUBBER BALL.
2. ASSEMBLY END OF CABLE A2 ONTO BOTH BUTTERFLY ARMS (L/M). FIX WITH
BOLTS (02) SPACERS (23) WASHERS (14) AND NUTS (19).
3. FIT CABLE A2 ONTO PULLEY (P5/P6), THEN ASSEMBLY PULLEYS (P5/P6) ONTO
BOTH PULLEY BRACKETS (T) WITH BOLTS (03) WASHERS (13) AND NUT (18).