Protimeter Digital Mini Page 1
1 Safety Considerations
Caution note for the WME pins - The Pin Moisture
measurement pins are extremely sharp and the instrument
should be handled with due care. The pins should be covered
with the cap provided with the unit when the function is not in
use.
Calibration of unit - The accuracy specifications of the
product are valid for one year after the date of calibration,
and the product requires recalibration after this period.
Only operate the measuring instrument properly, for its
intended purpose and within the parameters specified in
the technical data. Readings from moisture meters are not
definitive but are used to help a professional make informed
judgment to the material’s moisture condition. Conductive
material such as salts, carbon and metal can give false positive
readings.
2 Pin (WME) Mode Operation
Digital Mini uses electrical conductance principles to measure
the moisture level of the material between two electrodes. The
instrument has integral pin electrodes that may be firmly pressed
onto surfaces, or it may be used with various auxiliary moisture
probes, including Heavy Duty Pin Probe, Deep Wall Probes, a
Hammer Electrode (optional) or an EIFS probe (optional).
Remove the needle cap from the top of the Digital Mini and
press to switch it on.
To Next Page
Loading...
Need help?
General
