Page 4 Protimeter Digital Mini
6 Reference Mode
Measure the material until the meter’s reading is stable then
press for 2 seconds. This will store the reading until the
mode changes or the meter turns off. Now all reading taken after
will be displayed as normal, but below you will see a second
reading that shows you if the material is measured above or
below the original reading. Reference mode can be useful when
trying to establish what materials are above or below a point of
reference or dry standard. See page 6 for further information.
7 Operating Digital Mini
Switch On:
Press the ON/OFF button.
The unit turns on, with the LCD displaying all the segments and
sweeping the LED bar graph.
To Next Page
Loading...
Need help?
General
