Page 6 Protimeter Digital Mini
Reference Mode of Measurement:
Note: For application information, see Pin (WME) Mode
Operation> on page 1.
In Measure mode, take the first measurement which needs to be
taken as reference. While the first reading is displayed on the
screen, press and hold the button for 2 seconds to enter the
Reference Mode. The display will be similar to the one shown
on the next page.
To return to the normal measurement mode, press again.
Settings:
Press and hold the button and switch on the unit by
pressing . Hold both the buttons until the Digital Mini
displays the version.
Release both buttons while it shows the version number. The
unit enters Settings Mode.
To Next Page
Loading...
Need help?
General
