Protocol AERO 2.0 - Drone Operation and Flight; Take-Off and Landing Procedures; Emergency Landing Function

OPERATION: FLYING THE DRONE
TAKE–OFF:
1. Press the take off button. The remote will beep and the drone will hover a
few feet off the ground. Then gently advance the throttle to a desired height
and release. The drone will hover at that height.*
OR
2. From idle mode, gently advance the throttle up to a desired height and
release. The drone will hover at that height.*
LANDING:
1. Press the landing button to lower the drone to the ground.
OR
2. Push down on the throttle until the drone is on the ground.
UP
DOWN
NOTE:
EMERGENCY LANDING: Press the Emergency Landing button
and release and the drone will automatically stop.
*The drone may drift a bit, especially in the first 30 seconds
until the altitude sensor gets a good fix on the position.
Some drift is normal.
7
OR